Sub-Zero is the embodiment of style as well as performance refrigeration. It isn’t just an appliance, your Sub-Zero is an essential element of your perfect kitchen area. It makes good sense that you would not want to trust your refrigerator to just any device fixing firm. You desire a group of Sub-Zero refrigerator repair service specialists that can shield your financial investment while supplying the costs solution you are worthy of.
It Is Fixed Appliance Repair service is the company you need to trust with every one of your Sub-Zero repair requirements. Our professionals specialize in Sub-Zero service so you can rely on that we have the skills to finish the job right.
HOW TO USE THE ERROR CODE TROUBLESHOOTING OVERVIEW
Mistake Codes suggest issues signed up by specific elements. If error codes are signed up, they will show up prior to temperature analyses while in Diagnostic Setting.
NOTE: If Mistake Codes appear with a flashing “SERVICE” annunciator before initiating Diagnostic Mode, the system experienced excessive compressor run problem that might or might not be related to the Error Codes displayed
To initiate Diagnostic Setting, press and hold either COLDER trick, then push the POWER trick, after that launch both tricks. Now, inspect to see if Error Codes exist, making sure to toggle through all mistake and temperature readings by pressing either COLDER crucial or either WARMER secret. (See Mistake Code Table Below).
If Mistake Codes appear during Diagnostic Mode, follow the Mistake Code Troubleshooting Overview on the following page. The left column of the troubleshooting overview lists the error codes. The information in the appropriate column explains what examinations to do and/or what action to take to deal with the mistake.
KEEP IN MIND: If error codes are observed in analysis mode, a non-flashing SOLUTION annunciator will certainly appear on the LCD when Diagnostic Mode ends, showing mistake codes are still kept. Error Codes must be removed from the digital control memory by hand. To get rid of the non-flashing SERVICE annunciator and the mistake codes, the issue should be dealt with as well as the device should get on, then:.
Error Code Table
CODE | INDICATION |
05 | Refrig. cabinet thermistor read open or shorted for 10+ seconds, or repeatedly read erratic temp’s |
06 | Refrig. evaporator thermistor read open or shorted for 10+ seconds, or repeatedly read erratic temp’s |
07 | Freezer cabinet thermistor read open or shorted for 10+ seconds, or repeatedly read erratic temp’s |
08 | Freezer evaporator thermistor read open or shorted for 10+ seconds, or repeatedly read erratic temp’s |
20 | Defrost under-heat with no voltage feedback through Gray/White wire at defrost start |
21 | Defrost overheat |
22 | No voltage feedback through Gray/White wire at defrost start |
23 | Defrost overheat with no voltage feedback through Gray/White wire at defrost start |
24 | Defrost under-heat |
30 | N/A |
40 | Excessive Freezer Compressor Run |
50 | Excessive Refrigerator Compressor Run |
Error Code | CAUSE | SOLUTION |
Error Code 11 | The refrigerator is too warm and/or the upper cabinet has been open too long | You will receive this error if your refrigerator’s upper cabinet has been open too long or if the upper cabinet is too warm. To resolve the error, disconnect the power from the unit at the circuit breaker. Leave the power off for at least one minute. Turn the power back on and keep the refrigerator door closed until the unit has reached optimal temperature. |
Error Code 11
A. If “EE” for refrigerator compartment was displayed and “SERVICE” blinking, check the following:.