MODELS:
DF30 – DF36 – DF48 – DF60 DF30-3 – DF36-3 – DF48-3 – DF60-3 DF30-4 – DF36-4 – DF48-4 – DF60-4
DESIGN ATTRIBUTES:
DIAGNOSTIC MODE:
INITIATING DIAGNOSTIC MODE:
To initiate Diagnostic Mode, oven control knob bezel must be in the OFF position. Now, press and hold CLOCK key and TIMER key for 3 seconds. (See Figure 3-60)
The ambient cavity temperature will be displayed in the temperature readout knob. Now, turn the oven temperature readout knob to the right seven separate times, this will toggle from error code 1 thru 7. (See Figure 3-62)
To return to error code number one, turn oven temperature readout knob to the left seven separate times. (See Figure 3-63)
The software version will be displayed in the hours and minutes display of the clock. (See Figure 3-64)
KEEP IN MIND:
ERROR INDICATIONS:
Error codes can provide an aesthetic as well as distinct alarm. The visual indication will be “Err” displayed in the Cook Time digits as well as the number or letter of the mistake code will be presented in the Quit Time numbers of the Electronic Control Real Estate. The Stove Temperature level Readout Knob will additionally reveal “Err” in the display screen home window. The last seven mistakes will be saved in the EEPROM for recall when in analysis setting.
ERROR CODE | POSSIBLE CAUSE | TEST / ACTION |
1 | Door Lock or Unlock Switches not sensed within 60 seconds while driving the door | • Perform motorized door lock test procedure in diagnostic mode. • Ohm door lock switches. Replace MDL (Motor Door Lock) Assembly if defective |