MODELS:
DF30 – DF36 – DF48 – DF60 DF30-3 – DF36-3 – DF48-3 – DF60-3 DF30-4 – DF36-4 – DF48-4 – DF60-4
DESIGN FEATURES:
DIAGNOSTIC SETTING:
INITIATING DIAGNOSTIC MODE:
To initiate Diagnostic Mode, oven control knob bezel must be in the OFF position. Now, press and hold CLOCK key and TIMER key for 3 seconds. (See Figure 3-60)
The ambient cavity temperature will be displayed in the temperature readout knob. Now, turn the oven temperature readout knob to the right seven separate times, this will toggle from error code 1 thru 7. (See Figure 3-62)
To return to error code number one, turn oven temperature readout knob to the left seven separate times. (See Figure 3-63)
The software version will be displayed in the hours and minutes display of the clock. (See Figure 3-64)
KEEP IN MIND:
ERROR SIGNS:
Mistake codes can give an aesthetic and distinct alarm system. The visual indicator will certainly be “Err” shown in the Chef Time numbers and also the number or letter of the error code will certainly be displayed in the Quit Time numbers of the Electronic Control Real Estate. The Oven Temperature Readout Knob will certainly also show “Err” in the display screen home window. The last seven mistakes will be kept in the EEPROM for recall when in diagnostic mode.
ERROR CODE | POSSIBLE CAUSE | TEST / ACTION |
3 | Open circuit detected on RTD Oven Sensor | Ohm RTD sensor, replace if defective. If RTD good replace oven controller |