MODELS:
DF30 – DF36 – DF48 – DF60 DF30-3 – DF36-3 – DF48-3 – DF60-3 DF30-4 – DF36-4 – DF48-4 – DF60-4
VERSION ATTRIBUTES:
DIAGNOSTIC MODE:
INITIATING DIAGNOSTIC MODE:
To initiate Diagnostic Mode, oven control knob bezel must be in the OFF position. Now, press and hold CLOCK key and TIMER key for 3 seconds. (See Figure 3-60)
The ambient cavity temperature will be displayed in the temperature readout knob. Now, turn the oven temperature readout knob to the right seven separate times, this will toggle from error code 1 thru 7. (See Figure 3-62)
To return to error code number one, turn oven temperature readout knob to the left seven separate times. (See Figure 3-63)
The software version will be displayed in the hours and minutes display of the clock. (See Figure 3-64)
NOTE:
ERROR INDICATIONS:
Error codes can offer a visual and also audible alarm system. The visual sign will be “Err” displayed in the Chef Time numbers and also the number or letter of the error code will certainly be presented in the Stop Time figures of the Electronic Control Real Estate. The Stove Temperature level Readout Knob will certainly additionally reveal “Err” in the display window. The last 7 mistakes will certainly be kept in the EEPROM for recall when in diagnostic setting.
ERROR CODE | POSSIBLE CAUSE | TEST / ACTION |
4 | Shorted circuit detected on the RTD Sensor | Ohm RTD sensor, replace if defective. If RTD good replace oven controller |